Kitchenaid is a brand that makes different types of stand mixers. And tilt-head stand mixer is one of them. In this stand mixer, the bowl is attached to the bottom of the stand. But you can tilt up the head of the mixer. That’s why it’s called a tilt-head stand mixer.
Now, most people have some problems with this mixer. Which is the mixer bounces or shakes at the time of mixing something.
So, why KitchenAid mixer bounces when mixing?
Sometimes KitchenAid mixer bounces when you’re trying to mix something because for some reason. But the most common reason is the beater blade of the mixer is too high or too low. You just have to adjust a screw on the head of the mixer to solve this problem. And your mixer is good to go.
Now we’re going to know about this problem and its solutions in more detail.
Why KitchenAid Mixer Bounces When Mixing?
The KitchenAid tilt-head mixer sometimes has some troubleshooting. And one of them is the mixer starts bouncing at the time of mixing. This KitchenAid mixer troubleshooting occurs for some reasons.
The main reason is sometimes the Beater blade gets too high or too low. If this happens, some other problems come along with it as well. For example-
Sometimes, you can’t lock the head of the mixer into place properly. It happens when the beater is too high.
And when the beater is too low, the beater of the mixer will scratch the bottom of the bowl. And it will make the mixer bounce.
There is a silver pin on the base of the mixer. This pin is called the neck pin or hinge pin. Sometimes if this neck pin becomes loose, the KitchenAid mixer moves when mixing.
These are the problems that you might have to face if your beater gets too high or too low.
Now, here is some information in this table about the KitchenAid mixer bouncing problems with some details.
| Reasons Behind The KitchenAid Mixer Bouncing Problems | Solutions |
| The beater is too high | Turn the flat head screw on the tilt-head clockwise. |
| The beater is too low | Turn the flat head screw on the tilt-head counterclockwise. |
| The silver neck pin is loose | Tighten the screw under the stand of the mixer. |
Now we are going to discuss in detail how to fix a shaking KitchenAid mixer.
How to Fix It?
You already know about the problems that you can face with the KitchenAid mixer. So now, here are some ways of KitchenAid mixer setup that will solve the bouncing problem of the mixer.
These solutions can be used as the KitchenAid stand mixer troubleshooting manual.
If the beater of your mixer is too high or too low, then, lift up the head of the tilt-head mixer first. Then you’ll find a flat head screw there. You will have to adjust this screw either to raise or to lower your beater.
Now, place a coin in the mixer bowl. Then turn the mixer on at a low speed. If your mixer moves the coin around too much and also bounces, then the beater is too low.
That means, if the beater is low, you also might face the KitchenAid mixer speed control problems.
At this point, take a screwdriver and turn the flat head screw counterclockwise. This will raise the beater of the stand mixer.
But if the coin doesn’t move at all, that means, the beater of the mixer is too high. Then you will have to turn the flat head screw clockwise with the screwdriver. This will lower the beater of the mixer.
Now, you might see the coin moving a little bit each time the beater rotates completely. That means the beater is at the perfect height.
After that, you can lock the head of the mixer into place properly. Also, your mixer will stop scratching the bottom of the bowl. That will also stop the bouncing or the shaking of the mixer.
But, if the silver neck pin of your mixer is loose, it still can cause the mixer to bounce. To fix this problem, first, separate the mixing bowl from the stand. Then you just have to flip the mixer on its side. Then you will find a screw under the stand of the mixer.
After that, push the neck pin back into the stand of the mixer. Then, just take a screwdriver and tighten up the screw underneath the stand. That’s it.
This is how you can easily fix the problems and stop the bouncing of the KitchenAid mixer.
Different Ways of Using The KitchenAid Mixer
KitchenAid stand mixer is very easy to use. You just have to know how to attach mixer to KitchenAid. However, you can use this mixer in many other ways.
The KitchenAid stand mixer can be used for making a lot of various types of things. For that, there are many types of different accessories that you can attach to the mixer.
Five-Blade Spiralizer
You can cut different types of vegetables and fruits with this accessory. Like cucumber, lemon, apple, potato, carrot, etc.
You have to remove the head of the mixer from the stand. Then you have to attach the five-blade spiralizer to the mixer stand. Then it will cut the fruits and vegetables in a spiral shape which can be used for decorating foods.
Fresh Prep Slicer And Shredder
You can use this accessory for slicing cheese, fruits, and vegetables. You can also use it for shredding them. Just attach the fresh prep slicer and shredder accessory to the KitchenAid mixer. And then it will work as a slicer and shredder.
Pasta Roller
You can use the KitchenAid mixer as a pasta roller as well. For that, you will have to remove the head of the mixer from the stand first. Then you just have to attach the pasta roller accessory to the stand of the mixer.
After that, you can roll pasta dough or pizza dough with it. It will roll the pasta and pizza dough into thin sheets. Then you can use that to make pasta, lasagna, pizza, noodles, etc.
Pasta Cutter
Pasta cutter is also a very useful accessory for making pasta. It’s generally used after using the pasta roller. You can use it without the pasta roller as well. In that case, you have to handmake the pasta sheets.
Again, you have to attach the pasta cutter accessory to the stand of the KitchenAid mixer. Then, you have to put the pasta sheets in the cutter. That’s it. So, you can make pasta, lasagna, and noodles with it.
Meat Grinder
KitchenAid stand mixer can be used as a meat grinder as well. Again, to use this accessory, you have to remove the stand of the mixer. Then, you have to attach the meat grinder accessory to the KitchenAid stand.
After that, you can grind meat with it. So, this can be used for grinding meat for pasta, pizza, noodles, wrap, and so on.
Food Processor
This KitchenAid food processor accessory mainly cuts the vegetables into small pieces. You have to attach this accessory to the stand of the mixer.
Then you can cut potatoes, cabbage, cucumber, etc. with it. You can use this accessory to make coleslaw, pickles, soup, salad, potato dishes, and so on.
Ice Cream Grinder
The KitchenAid mixer also can be used as an ice cream grinder. In the same way, you have to attach the ice cream grinder to the stand of the mixer. Then you can use it to make delicious ice cream.
FAQs
Why does my KitchenAid mixer scratch the bottom of the bowl?
Your KitchenAid mixer scratches the bottom of the bowl because the beater of the mixer is too low. At this point, you just have to lift the tilt-head up. Then you will find a flat head screw on the tilt-head. Just turn the screw counterclockwise to raise the beater.
What can you make with a KitchenAid stand mixer?
Many types of foods can be made with a KitchenAid mixer. Because you can add different types of accessories to this mixer. So, you can make pasta, ice cream, pizza, bread, and salads with a single mixer. You can make some decorative foods with it as well.
How does a KitchenAid tilt-head stand mixer work?
KitchenAid tilt-head mixer is a type of stand mixer that has a head that you can tilt up. You can do this while you’re adding or taking out ingredients from the bowl. But the mixing bowl has to be attached to the stand of the mixer.
Conclusion
Now, we already know why KitchenAid mixer bounces when mixing. And we know what to do to fix this problem as well.
So, if we face the same kind of mixer’s bouncing problem again, we only need a single screwdriver. And just like that, we can fix the problem anytime.
